VersaHard 9504
VersaHard 9504 is a standard hardener for general purpose epoxy coatings.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) |
SIZE AVAILABILITY
| 1 Gallon Pail | |
| 3 Gallon Pail | |
| 5 Gallon Pail | |
| 55 Gallon Drum |
TECHNICAL DESCRIPTION
VersaHard 9504 can be used with various VersaRez products.
However it is primarily used with VersaRez 9108. VersaHard 9504
along with VersaRez 9108 forms a 100% solids, two-component AHC
(Advanced Hybrid Cycloaliphatic) epoxy floor coating which exhibits
excellent adhesion on concrete. The coating’s uses include epoxy
flooring or concrete patching. The VersaRez 9108 and VersaHard 9504
coating can be used alone or can be topcoated with other Wolverine
Coatings Corporation products.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.