IntegraFlex 1437

IntegraFlex 1437 is a glass flake reinforced lining material designed for areas requiring excellent chemical resistance in immersion conditions.

TECHNICAL DESCRIPTION

IntegraFlex 1437 is a 100% solids, glass flake reinforced, proprietary formulated Advanced Hybrid Cycloaliphatic Phenolic Novolac Polysulfide based lining material. IntegraFlex 1437 is designed for corrosion control, abrasion resistance, chemical resistance, low permeability, thermal and mechanical shock resistance, and toughness in chemical plants, and other areas requiring excellent chemical resistance in immersion conditions.  IntegraFlex 1437 may also be used for restoration and leak prevention of petroleum storage tank bottoms, pipelines, and rail cars where resistance to chemicals and abrasion is required.  IntegraFlex 1437 can be spray-applied from 16–125 mils DFT depending on the extent of corrosion, and is flexibilized to reduce coating stress resulting from mechanical and physical forces exerted on the substrate.  IntegraFlex 1437 is a two-component system; Resin and Hardener.

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.