HybriShield 2401
PRODUCT TEMPORARILY UNAVAILABLE
HybriShield 2401 is a clear gloss top coat that shows excellent resistance in aquatic environments.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) Part A |
|
Safety Data Sheet (SDS) Part B |
SIZE AVAILABILITY
| 3 Quart Kit: | |
| Resin – 1 Gallon Can | |
| Hardener – 1 Quart Can | |
| 3 Gallon Kit: | |
| Resin – 3.5 Gallon Pail | |
| Hardener – 1 Gallon Can | |
| 15 Gallon Kit: | |
| Resin – (x2) 5 Gallon Pails | |
| Hardener – 5 Gallon Pail |
TECHNICAL DESCRIPTION
HybriShield 2401 is a High Solids, two component, clear, gloss, Liquid Polycarbonate, hybrid polymer. It can be applied over an epoxy primer/basecoat or used to recoat an existing epoxy or urethane floor. Adding WearResist 105 additive will give a satin finish, increase the coefficient of friction (slip resistance), and increase abrasion resistance further. Adding SpheriTex 110 additive will increase the texture more than WearResist 105 but will maintain a glossier appearance. ColorMeld Color Packs may be used for pigmentation.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.