FlashPatch 1221
FlashPatch 1221 is a fast curing repair putty used as a filler for spalls, cracks, and holes in concrete and steel.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) Part A |
|
Safety Data Sheet (SDS) Part B |
SIZE AVAILABILITY
| 2 Quart Kit: | |
| Resin – 1 Quart Can | |
| Hardener – 1 Quart Can | |
| 2 Gallon Kit: | |
| Resin – 1 Gallon Pail | |
| Hardener – 1 Gallon Pail | |
TECHNICAL DESCRIPTION
FlashPatch 1221 Fast Curing Epoxy Repair Putty is a 100% solids, two-component polymer hybrid that will provide a resilient filler for spalls, cracks, and holes in concrete and steel. FlashPatch 1221 is a semi-rigid patching material that provides exceptional adhesion characteristics. It can be applied in deep holes on horizontal or vertical surfaces and up to ½” on overhead surfaces. FlashPatch 1221 can be machined in as little as 1 hour, depending on temperature and humidity.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.