EnduraShield 2254
EnduraShield 2254 is a clear gloss urethane that is applied over epoxy or used to recoat existing epoxy or urethane floor. Additives can be used to increase slip and abrasion resistance.
 |
Technical Data Sheet (TDS) | |
|
|
|
|
Safety Data Sheet (SDS) Part B | |
 |
General Product Brochure (GPB) |
SIZE AVAILABILITY
| 0.625 Gallon Kit: | |
| Resin – 1 Pint Can | |
| Hardener – 1/2 Gallon Can | |
| 1.25 Gallon Kit: | |
| Resin – 1 Quart Can | |
| Hardener – 1 Gallon Can |
TECHNICAL DESCRIPTION
EnduraShield 2254 is a High Solids two component aliphatic clear gloss hybrid urethane applied over an epoxy primer or used to recoat and existing epoxy or urethane floor. Adding WearResist 105 additive will give a satin finish, increase the coefficient of friction (slip resistance), and increase abrasion resistance further. Adding SpheriTex 110 additive will increase the texture more than WearResist 105 but will maintain a glossier appearance. ColorMeld Color Packs may be used for pigmentation.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.