ChemShield 1837

ChemShield 1837 is a glass flake filled lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. It can be spray applied at 40-125 mils depending on the extent of corrosion.

TECHNICAL DESCRIPTION

ChemShield 1837 is a thick-film, internally reinforced 100% solids Glass Flake Filled, AHC High Functionality Phenolic Novolac based internal lining designed for chemical storage tanks in chemical plants, and any other areas requiring exceptional chemical resistance in immersion conditions. This proprietary formulated lining may also be used for restoration and leak prevention of petroleum storage tank bottoms and pipelines where exceptional chemical resistance is needed. ChemShield 1837 is spray-applied from 40–125 mils DFT depending on the extent of corrosion. ChemShield 1837 is a two-component system; Resin and Hardener.

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.