ChemShield 1680
ChemShield 1680 is an internal lining for chemical storage tanks designed for corrosion control, chemical resistance, and abrasion resistance and can be used for restoration and leak prevention of petroleum storage tanks and pipelines.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) Part A |
|
Safety Data Sheet (SDS) Part B |
 |
Product Color Chart (PCC) |
SIZE AVAILABILITY
| 3 Quart Kit: | |
| Resin – 1 Gallon Can | |
| Hardener – 1 Quart Can | |
| 3 Gallon Kit: | |
| Resin – 3.5 Gallon Pail | |
| Hardener – 1 Gallon Can | |
| 15 Gallon Kit: | |
| Resin – (x2) 5 Gallon Pails | |
| Hardener – 5 Gallon Pail |
TECHNICAL DESCRIPTION
ChemShield 1680 is a thick-film, 100% solids reinforced, proprietary formulated AHC (Advanced Hybrid Cycloaliphatic) Epoxy Novolac based internal lining for chemical storage tanks. ChemShield 1680 is designed for corrosion control, chemical resistance, and abrasion resistance and can be used for restoration and leak prevention of petroleum storage tank bottoms and pipelines where resistance to abrasion is also needed. ChemShield 1680 is available in five variations allowing spray-applied from 20–125 mils DFT depending on the extent of corrosion. ChemShield 1680 is a two-component system; Resin and Hardener.
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.