ChemShield 1633

ChemShield 1633 is a glass flake filled novolac coating designed for corrosion control, abrasion resistance, chemical resistance, thermal shock resistance, and toughness in chemical plants and other areas requiring excellent chemical resistance in immersion conditions.

TECHNICAL DESCRIPTION

ChemShield 1633 is a thick-film, 100% solids reinforced, glass flake filled, proprietary formulated Advanced Hybrid Epoxy Novolac based coating or lining material. ChemShield 1633 is designed for corrosion control, abrasion resistance, chemical resistance, thermal shock resistance, and toughness in chemical plants, and other areas requiring excellent chemical resistance in immersion conditions. ChemShield 1633 may also be used for restoration and leak prevention of petroleum storage tank bottoms and pipelines where resistance to abrasion is needed. ChemShield 1633 can be spray-applied from 40–125 mils DFT depending on the extent of corrosion, and is flexibilized to reduce coating stress resulting from mechanical and physical forces exerted on the substrate. ChemShield 1633 is a two-component system; Resin and Hardener.

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.