ChemShield 1606
ChemShield 1606 is a fast curing lining designed for corrosion control in chemical plants, or any other areas requiring excellent chemical resistance in immersion conditions. This product can be used to resist a wide range of chemicals, temperatures, and pressures.
 |
Technical Data Sheet (TDS) |
|
Safety Data Sheet (SDS) Part A |
|
Safety Data Sheet (SDS) Part B |
SIZE AVAILABILITY
| 3 Quart Kit: | |
| Resin – 1 Gallon Can | |
| Hardener – 1 Quart Can | |
| 3 Gallon Kit: | |
| Resin – 3.5 Gallon Pail | |
| Hardener – 1 Gallon Can | |
| 15 Gallon Kit: | |
| Resin – (x2) 5 Gallon Pails | |
| Hardener – 5 Gallon Pail |
TECHNICAL DESCRIPTION
ChemShield 1606 is a two-component, high solids, fast curing, proprietary formulated novolac-based advanced hybrid cycloaliphatic lining designed for corrosion control in chemical plants, and any other areas requiring excellent chemical resistance in immersion conditions. ChemShield 1606 can be applied in either a one coat application (up to 15 mils DFT) or a multiple coat application (to achieve a thickness up to 20 mils DFT). ChemShield 1606 can be used to resist a wide range of chemicals, temperatures, and pressures.
TYPICAL USES
- Steel and fiberglass storage tank internals or pipelines
- High temperature tanks and process vessels
- Caustic Railcar service
- Chemical process floors and concrete containment areas
- Pulp and Paper Services (Excellent resistance to chlorine)
BENEFITS
- Superior wide range chemical resistance
- High solids
- Flexible to reduce coating stress caused by “oil canning” effects
- High-build, easy to install monolithic application process (5-20 mils DFT)
- Excellent adhesion to steel
APPLICATION DATA SUMMARY
See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.
SURFACE PREPARATION
Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.
SAFETY PRECAUTIONS
Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.