ChemShield 1104

ChemShield 1104 is a thin film polymer designed for general use as a primer and sealant for concrete, cinder block, fiberglass, and steel.

TECHNICAL DESCRIPTION

ChemShield 1104 is a thin-film, 100% solids reinforced, propriety formulated epoxy-based polymer designed for general use as a primer and sealant for concrete, cinder block, fiberglass, and steel.  ChemShield 1104 is a two-component system;  Resin and Hardener.

TYPICAL USES

• Industrial and domestic waste water tanks, basins, and sumps.
• Swimming pools, spas and other aquatic environments
• Concrete, cinder block and masonry structures used in car wash tunnels

BENEFITS

• Easy to install, roller or spray-applied monolithic application process
• Flexible to reduce coating stress caused by physical, thermal, or mechanical forces
• Excellent adhesion to concrete, & steel substrates
• Seals and protects concrete surfaces against degradation caused by exposure to water
• Promotes adhesion of topcoat and substrate
• Abrasion and impact resistant
• VOC compliant

CHEMICAL RESISTANCE

Summarized; for a more comprehensive list of chemical resistance, please refer to our Product Resistance Data Guide. Films cured for 7 (seven) days at 77ºF are unaffected after 1 (one) year immersion at ambient temperatures.

• Ammonium Hydroxide (mild)   • Benzene   • Brine Solution   • Calcium Chloride   • Detergents,diluted   • Gasoline, all grades   • Hydrochloric Acid (mild)   • Mineral Spirits   • Oil (animal, vegetable)   • Oil (petroleum)  • Sodium Bicarbonate   • Sodium Chloride (20%)   • Sodium Hydroxide (10%)   • Sodium Phosphate (50%)   • Starch   • Sulfuric Acid (10%)   • Water, distilled   • Water, salt (20%)   • Water, waste

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.