BondTite 1501

BondTite 1501 is a water-reducible epoxy primer that can be applied to green concrete well within the typical 28 day curing period. If applied on concrete within 12 hours of the pour, it eliminates the need to shot blast and allows coating of the concrete the next day.

TECHNICAL DESCRIPTION

BondTite 1501 Primer is a unique three-component, Water-Reducible epoxy Primer. It can be applied to properly designed green concrete well within the typical 28 day curing period. When applied to concrete within 12 hours of the pour, it eliminates the need to shotblast and allows coating of the concrete the next day with a properly specified coating system! This is accomplished by superior penetration and adhesion to the ‘green’ concrete slab. The coating’s uses include the priming of floors, manholes, sumps, and other areas until overcoating can be completed. In addition, BondTite 1501 will seal and promote hydration of the fresh concrete.

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.