AcryliSeal 3581

AcryliSeal 3581 is a pigmented water based acrylic sealer that “laminates” concrete by providing a protective barrier against UV rays, oxidation, water, oils, and chemicals.

TECHNICAL DESCRIPTION

AcryliSeal 3581 is a high performance Water-Based Nano-Polymer Acrylic Coating Base (Pastel or Neutral) which leaves a protective coating on the concrete surface that both waterproofs and seals.  It contains no silicones, waxes, or oils and does not fade, yellow, chip, or peel when applied properly.  This coating is created with a new generation of NanoPolymer resin technology that creates a water-based product that will outperform comparable solvent-based (or water-based) products. This acrylic sealer will have much higher resistance to most chemicals including solvents, gasoline, and brake fluid which would not normally be withstood by conventional acrylics. In addition, an extremely tough acrylic surface is formed that is remarkably blush resistant and has many special qualities.   Treated surfaces shed water, dirt, soot and chemical contaminants to prevent staining and moisture damage to the matrix.  Because of the unusual characteristics of this formulation, it may be used for many different applications. 

APPLICATION DATA SUMMARY

See Application Instructions for complete information on surface preparation, equipment, environmental conditions, application procedures, and safety precautions. For conditions outside the specifications or limitations described, contact Wolverine Coatings Corporation for details.

SURFACE PREPARATION

Coating performance is directly related to the quality and degree of surface preparation. Prior to overcoating, all surfaces must be clean, dry, undamaged, and free of all contaminants. For more specific information, consult the surface preparation section contained in the Application instructions.

SAFETY PRECAUTIONS

Read the Safety Data Sheet carefully before use. Safety precautions in the SDS should be carefully followed during storage, handling and use. Improper use and handling can be hazardous to health and cause fire or explosion.